RT-S0180 Digital Display Three buttons controlled High Frequency
※ Good quality and reasonable price.
※ Technical assistance provided.
※ Professional service before and after sale
※ All mails could be replied within 24 hours.
※ Skype video assisted any problem.
Temperature Setting YMK Soldering Station:
Way 1: press " +" & "-" button to adjust the temperature you
want, and then press ＊ button for confirmation.
Way 2: press ＊ button in first and then press " +" & "-" button
in same time, Hundred Digit is flash, press " +" or "-" button to
find the exactly data, then press ＊ button to move to Ten Digit,
Tem Digit is flash too, again press " +" or "-" button to find the
exactly data; press ＊ button to move to Single Digit, Single Digit
flash as well, press " +" or "-" button to find the exactly data,
finally, press ＊ button one more time for the final confirm.
● Suitable for large solder joints .
● High precision to ensure high quality solder joints.
● High stability temperature to ensure stable soldering effect .
● Rapid heating up can soldering continue and make work in high
efficiency (Station only keep < 45℃)
● Password temperature lock function suitable for factory has
specific requirements on soldering temp.
● 16 kinds of working modes easy to meet different field factory
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
|surface box||115*108*9mm||ABS material|
|protective sheet||25*50*1.5mm||tempered (Acrylic) glass|
|power switch||∮22mm,6A250VAC||silver alloy contacts|
|back cover||105*110*1mm||metal materials|
|aviation socket||GX16-6P(B)||metal material|
|power transformer||RT-180||high quality ring|
|control board||HF-006||glass plate|
|drive circuit board||HF-004||glass plate|
|grounded Block||∮8*4mm||alloy plus temp materials|
|power outlet||10A250VAC||copper temp materials|
|fuse||2.5A/250V||∮5*20mm,slow blow type|
|Electromagnetic iron||SI-180||electromagnetic heating|
Auto Sleep Mode Operation:
If you have been chose the working mode with “ auto sleep &
auto shutdown” , it will be show “ ---“ in display if soldering
iron not use for over 20 minutes, by now the temperature of
soldering tip will be down to 200 °C if the setting working
temperature greater or equal to 200 °C or down to 50°C if the
setting working temperature below 200 °C , station will keep this
temperature until recover the soldering.
There are three ways to wake up sleeping:
1. Turn off the power switch and then turn on again.
2. Press any button in Station.
3. Pick up the soldering iron.
Please attention that it can’t wake up If the Soldering station
over 40 minutes in sleeping condition, soldering iron will cut off
the power supply in automatically and no any showing in display.