Stainless Steel Nut Copper Coating Tip100 Watt High Frequency
Soldering Iron Feature:
1. High precision/ high accuracy single chip microcomputer
temperature control circuit, control the temperature is more
precision / accurate.
2. stainless steel Electromagnetic heater, K-type thermocouple
transducer / thermocouple Sensor, heat up fast and no need 20
seconds to heat up to 350℃.
3. The inside use terminal security connection mode and separating/
disconnect-type power cord.
4. Electrical equipment safety meet with the international
5. Multilayers oxidation resistance and anti-corrosion round &
sharp soldering tips.
The principle of high frequency eddy current heating (induction
heating principle), High frequency Lead free soldering station is
heat up at soldering tip itself, and no heat conduction, reduce
thermal losses, heat up fastly and temperature returning quickly.
When the heater on to 380 KHZ high frequency alternating current
(ac), the heating cord coil Alternating magnetic field is produced
and the top of tip in front of heating cord will have the field
lines through, Due to the change of the magnetic field strength, In
a soldering iron head will produce the ring closure of the induced
current, this induced current name eddy, Because the electric
current has thermal effect, So the tip got hot and Temperatures
Soldering Iron Character:
1. Designed for HF Soldering station RT-S0100.
2. Surprising speed up from room temperature to 350℃ not more than
3. Intellectualized soldering with big power, and changes over spot
size, again big of solder joint can complete well, can be
effectively avoid the connection not fastness which caused by the
cold soldering, etc.
4. Heat auto recovery ability, amazing speed of temperature
compensation to solve the contradiction in the lead-free soldering
process of temperature, .
5. An essential tool for some specific soldering at low
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
|tip sheath||∮8.5*43mm||stainless steel|
|soldering tip||∮4*16.5mm||copper plus coating|
|hedging||M15*22mm||high temp materials|
|heater||HT-150||silver wire wound|
|vibration switch||SW-18010P||temperature 100°C|
|hook spring||∮0.8*86mm||stainless steel|
|handle sheath||∮22*40mm||Silica gel|
|assembled wire||1.2m||anti-scald silicone line|