100Watt High Frequency Soldering Station RT-S0100 High Frequency
Soldering Iron Character:
1. Designed for HF Soldering station RT-S0100.
2. Surprising speed up from room temperature to 350℃ not more than
3. Intellectualized soldering with big power, and changes over spot
size, again big of solder joint can complete well, can be
effectively avoid the connection not fastness which caused by the
cold soldering, etc.
4. Heat auto recovery ability, amazing speed of temperature
compensation to solve the contradiction in the lead-free soldering
process of temperature, .
5. An essential tool for some specific soldering at low
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
Soldering Iron Troubleshooting
Pull the plug, measure the resistance value between the feet and
legs of the connector plug :
If " a " or " b ", the resistance value of the following table are different, need
to replace the heating core, a sensor or ass'y of wires. Follow
items 1 and 2
If the resistance value of the " c " is greater than the resistance value of the following table,
will have to check whether the connection is loose or oxidation of
3 foot cable with fever core shell after the connection or removing
the oxide layer.
|a.||between 4 feet and 5 feet (heater)||＜1 Ω (normal)|
|b.||between 1 foot and 2 feet (sensor)||＜10 Ω (normal)|
|c.||between 3 feet and iron tip||＜2 Ω (normal)|
High Frequency Soldering irons can used for installation, repairs,
and limited production work in electronics assembly. Large tips
series can be used for soldering joints in sheet metal objects,
also for the special field, like pyrography, Jewelry and Plastic as well.