Exclusively Supply Germany Industrial High Frequency Soldering
Industrial Soldering Station Features:
RT-S0230 Mainly Specification:
|Temperature range||50~600 °C (depending on the mode setting)|
|Maximum ambient temperature||42 °C|
|Temperature stability||±2 °C (in still air, no load)|
|Housing Material||Aluminum Alloy|
Working Mode Setting:
Turn off the power switch, use your right hand press the " + " and
" - " button in same time, don’t move your right hand, left hand to
turn on the power switch all at once, display shows " C "sign in it
, Press ” * ” button, display shows “---“ sign, enter factory
original password ”000” and then press” * ” to confirm, display
will show “0.1-“ sign, pressing the " + " and " - " button at the
same time, display show “X “ sign, it means soldering station now
in working mode selection, press “ + ” or “ - ” button to choose
the number that your working mode needing, YMK High Frequency
Soldering Station got 16 kinds working mode for your option.
Working Mode is selected, press " * " button for the confirmation
and the selected mode is saved automatically.
16 Kinds Working Mode Chart:
Auto Sleep Mode Operation:
If you have been chose the working mode with “ auto sleep &
auto shutdown” , it will be show “ ---“ in display if soldering
iron not use for over 20 minutes, by now the temperature of
soldering tip will be down to 200 °C if the setting working
temperature greater or equal to 200 °C or down to 50°C if the
setting working temperature below 200 °C , station will keep this
temperature until recover the soldering.
There are three ways to wake up sleeping:
1. Turn off the power switch and then turn on again.
2. Press any button in Station.
3. Pick up the soldering iron.
Please attention that it can’t wake up If the Soldering station
over 40 minutes in sleeping condition, soldering iron will cut off
the power supply in automatically and no any showing in display.
230W Temperature Graph: